Training lab infos

Login to KVM at https://192.168.98.10/#/ using the credentials provided

In the main chassis view, you will see three nodes with a small green box

these are the nodes you have access to use

Hover over one, then click its name (eg "Cartridge 10")

Now on the page for this cartridge, click the small block screen icon on the top right

this will open the remote KVM - choose HTML5 for the type

It will probably be blank because the cartridge is off

First mount the install ISO, click the CD icon top left > CD/DVD > Scripted Media URL

Paste the following URL in the box and hit apply: http://192.168.98.6/xcp-ng-8.2.1-20231130-netinstall.iso
Full XCP ISO: http://192.168.98.6/xcp-ng-8.2.1-20231130.iso

click the three line menu top left, then Power > Momentary press to turn on the cartridge

it will take a few minutes to boot into the ISO. If it does not, send a reset command through the same power menu top left,

and now press F11 during boot for the boot menu, and choose the virtual ILO CD/DVD
----
When XCP has finished installing you will need to force the server to boot through XCP for this:

The server will start xcp bootloader.
----

during install when configuring the network, enable VLAN and enter vlan 99 for management. interface to use is eth0

DHCP is available and recommended, so no static necessary
NTP setting for the lab: fr.pool.ntp.org

-----

User for XCP: root

User for XOA web interface: admin
Password for XCP and XOA: XCPtraining

----